Author Topic: CZ 75 B - Plan to add a Miniature Red Dot Sight  (Read 164 times)

0 Members and 1 Guest are viewing this topic.

Offline st.attila

  • Newbie
  • *
  • Posts: 5
CZ 75 B - Plan to add a Miniature Red Dot Sight
« on: January 07, 2018, 02:19:16 PM »
I’m planning to add a miniature red dot sight to my CZ 75 B (matte stainless).  I’m looking for feedback from those who have done it and its pros and cons.

I’m also interested in what sight you purchased and why (i.e., Burris, Trijicon, Vortex, etc.).

Lastly, I’m looking to use one of these brand’s mounts.  What did you chose and why?

Evolution Gun Works (EGW) Inc:

http://www.egwguns.com/pistol-scope-mounts/optima/jp-for-cz-75/

http://www.egwguns.com/pistol-scope-mounts/vortex-razor-for-cz-75/

http://www.egwguns.com/pistol-scope-mounts/docter-mount-for-cz-75/

Springer Precision LLC:

http://shop.springerprecision.com/product.sc?productId=261&categoryId=101

http://shop.springerprecision.com/product.sc?productId=351&categoryId=101

Cajun Gun Works:

https://cajungunworks.com/product/49326-doctor-optic-mount-for-cz-75/

https://cajungunworks.com/product/49402-optima-jp-leupold-dpp-mount-cz-75/

Slaughter Gunsmithing and Machine Works

http://slaughterguns.com/sight_mounts.html
« Last Edit: January 16, 2018, 08:37:23 PM by st.attila, Reason: Added another sight mount manufacturer. »

Offline scourge

  • Newbie
  • *
  • Posts: 10
Re: CZ 75 B - Plan to add a Miniature Red Dot Sight
« Reply #1 on: January 07, 2018, 02:36:33 PM »
Have your slide machined for a Burris FF3 by CZ customs.   Mine was Very well done.  Groups with Fed. Am. Eagle 115 are just about the size of a quarter off the bench at 50' for all 10 shots. 

Offline st.attila

  • Newbie
  • *
  • Posts: 5
Re: CZ 75 B - Plan to add a Miniature Red Dot Sight
« Reply #2 on: January 07, 2018, 02:51:00 PM »
Have your slide machined for a Burris FF3 by CZ customs...

Is this the similar service, but for a CZ 75 B?

https://czcustom.com/custom-work/s-i-rds-plate-cut-and-plate.html

Did you get one of these as well?

https://czcustom.com/rds-plate-fixed-sh-sight.html

Offline scourge

  • Newbie
  • *
  • Posts: 10
Re: CZ 75 B - Plan to add a Miniature Red Dot Sight
« Reply #3 on: January 08, 2018, 08:21:49 AM »
There is no "plate".  Just two drilled and tapped holes in the bottom of the machined cut slide.  I believe the fee is $120?

Offline cdhbrad

  • Full Member
  • ***
  • Posts: 207
Re: CZ 75 B - Plan to add a Miniature Red Dot Sight
« Reply #4 on: January 08, 2018, 11:08:40 AM »
I have an Accu-Shadow Light from CZ Custom that I didn't want to mill the slide on (in case I decided to sell it) and I used the Springer Precision mount to add a Vortex Venom.  Works great and the most difficult part of the installation was removal of the original sight.  Springer offers several sights at competitive prices too.   

Ideally and as others have suggested, get the slide milled but, if you aren't sure you want the change to be permanent, the Springer mount works well and is easy to install. 

Offline Earl Keese

  • Hero Member
  • *****
  • Posts: 1843
Re: CZ 75 B - Plan to add a Miniature Red Dot Sight
« Reply #5 on: January 08, 2018, 11:18:38 AM »
Boy, to mill a SS 75B would be a tough decision to make. I don't think I could do it.

 

anything