Author Topic: Stumbled on a T-100 today...  (Read 285 times)

0 Members and 1 Guest are viewing this topic.

Offline cammobunker

  • Newbie
  • *
  • Posts: 27
Stumbled on a T-100 today...
« on: January 07, 2018, 10:45:54 PM »
Went to the first gun show I've been to in over a year today, not necessarily looking for anything in particular. There sat a lonely, abused T-100 on a guys table. It has actual finish wear (!), wears slim-line aluminum grips, came with one magazine and nothing else. I noted the safety was missing the ball detent but I knew this was an easily available part. I asked how much? He said 300. He wanted it gone, he said. Bought it for a girlfriend who wasn't a girlfriend anymore (he didn't sound too sad about that, actually). I noted the malfunctioning safety and proposed $250, and we settled at $275. Out it went with me. T-100's being sold out everywhere these days, and used ones going for over $400 on the auction sites right now, I thought I did OK.
Interestingly, the front of the grips were profiled down into a smooth transition to the frame which gives it a very nice feel at the front.
No pics yet, as I suspect this gun may have had a 1000 rounds (possibly more) through her without cleaning. It's utterly filthy, and the grips need touching up, and of course the safety detent is missing. It's so dirty it was hard to field strip.
This is one of the "transitional" frames with the "Shark" flat base triggerguard like the Jericho but marked T-100. 

Now for some gunscrubber, black paint for the grips and a trip to CGW for a pair of safety lever detent bearings. And maybe Greg Cote for some compact mags. I've got full size mags that will work of course but this looks like a nice carry gun once she's fitted up and functioning to my satisfaction. 

Offline Flibuoy1

  • Full Member
  • ***
  • Posts: 127
Re: Stumbled on a T-100 today...
« Reply #1 on: January 07, 2018, 11:16:58 PM »
Never heard that there was a “transitional” T-100. I do have one of Academy’s first and it is that flat bottom. I just sold a late Academy example that I had bought used recently with less than box through it... it had a rounded trigger guard bottom. I sometimes wonder if there are two T-100s that match....running changes galore.

Did the spring leave with the detention ball? Sometimes they, somehow, stick in their receptacle.  If you didn’t check now would be a good time so you can order with ball. If it is there...and you happen to have some steel pellet birdshot around....poof! A dab of grease on ball will help retain it on reinstall.

I do find it odd that it was that nasty when you bought it...good luck on what you find when you get it all spiffed up and can see the condition better. They are a great pistol with a distinctive look. I hope you enjoy yours
Have you ever seen a statue honoring someone who left well enough alone?

Offline jwc007

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 9426
Re: Stumbled on a T-100 today...
« Reply #2 on: January 08, 2018, 02:28:14 PM »
Congratulations on the deal and may it serve you well!  8)  :)
"Easy is the path to wisdom for those not blinded by ego." - Yoda


For all of those killed by a 9mm: "Get up! You are not dead! You were shot with a useless cartridge!"

Offline cammobunker

  • Newbie
  • *
  • Posts: 27
Re: Stumbled on a T-100 today...
« Reply #3 on: January 08, 2018, 11:30:07 PM »
Never heard that there was a “transitional” T-100. I do have one of Academy’s first and it is that flat bottom. I just sold a late Academy example that I had bought used recently with less than box through it... it had a rounded trigger guard bottom. I sometimes wonder if there are two T-100s that match....running changes galore.

Did the spring leave with the detention ball? Sometimes they, somehow, stick in their receptacle.  If you didn’t check now would be a good time so you can order with ball. If it is there...and you happen to have some steel pellet birdshot around....poof! A dab of grease on ball will help retain it on reinstall.

I do find it odd that it was that nasty when you bought it...good luck on what you find when you get it all spiffed up and can see the condition better. They are a great pistol with a distinctive look. I hope you enjoy yours
Well I've now determined that the tiny spring is still resident in the safety, so all I need is the ball. I've also determined that removing said safety from the frame more or less commits you to a full tear down of the rear end of the gun since the sear/ejector assembly is under mainspring tension. You might get it out, like I did, but you aren't going to get it back in again without releasing that tension.
Besides, I've gone this far, I might just as well finish tearing it down, it seriously needs a detail strip cleaning anyway. It really is just utterly filthy. I have to say that the simplifications that Canik made to the CZ 75 sure makes detail stripping the frame easier. I'm still afraid to strip my CZ Pre-combat, although it needs it.

Offline Flibuoy1

  • Full Member
  • ***
  • Posts: 127
Re: Stumbled on a T-100 today...
« Reply #4 on: January 09, 2018, 02:07:24 PM »
Take it all off!

Strip that thing and love on it. It sure makes for a better pistol that will love you back
Have you ever seen a statue honoring someone who left well enough alone?

Offline 75Plus

  • Hero Member
  • *****
  • Posts: 1231
  • +8
Re: Stumbled on a T-100 today...
« Reply #5 on: January 11, 2018, 05:01:40 PM »
Well I've now determined that the tiny spring is still resident in the safety, so all I need is the ball. I've also determined that removing said safety from the frame more or less commits you to a full tear down of the rear end of the gun since the sear/ejector assembly is under mainspring tension. You might get it out, like I did, but you aren't going to get it back in again without releasing that tension.

You can tie the hammer all the way back by looping a zip tie around the hammer and the beaver tail. The only spring left to deal with will be the trigger bar spring which must be dealt with in any event. PM me your mailing address and I will send you a rare earth magnet ball that is nearly impossible to loose!

Joe
“Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth.”
George Washington

"A gun is like a parachute.  If you need one, and don't have one, you'll probably never need one again."

Offline cammobunker

  • Newbie
  • *
  • Posts: 27
Re: Stumbled on a T-100 today...
« Reply #6 on: January 12, 2018, 11:21:26 PM »
You can tie the hammer all the way back by looping a zip tie around the hammer and the beaver tail. The only spring left to deal with will be the trigger bar spring which must be dealt with in any event. PM me your mailing address and I will send you a rare earth magnet ball that is nearly impossible to loose!

Joe

A zip tie you say? Reeeaalllly... I like the sound of that! I was really not looking forward to pulling that hammer spring out if I could avoid it. And yes, I'll take you up on your offer of the magnetic ball too...I've already bought a couple from CGW (that aren't here yet) but those could become emergency spares in the parts box easily. Thank you!