Author Topic: trigger for CZ 455 Tacticool  (Read 825 times)

0 Members and 1 Guest are viewing this topic.

Offline jeterm

  • Jr. Member
  • **
  • Posts: 97
  • RAMI Owner
trigger for CZ 455 Tacticool
« on: February 12, 2018, 03:06:07 PM »
I'm looking for a good adjustable drop in trigger for my new CZ 455 Tacticool.  I just bought it and would like to have a decent trigger that I can fine-tune, but I don't want to modify my stock.  Is there such an animal out there?  Thanks!

Offline painter

  • Hero Member
  • *****
  • Posts: 5544
Re: trigger for CZ 455 Tacticool
« Reply #1 on: February 12, 2018, 04:36:15 PM »
I know the Timney, the CZ Mr.Fly, and the newest entry the Langley all require stock mods.

You might look into a Rifle Basix. I don't believe those require any.

https://riflebasix.com/product/ceska-zbrojovka-452-trigger-cz-52/
« Last Edit: February 12, 2018, 04:39:50 PM by painter »
I had the right to remain silent...

but not the ability.

Offline jeterm

  • Jr. Member
  • **
  • Posts: 97
  • RAMI Owner
Re: trigger for CZ 455 Tacticool
« Reply #2 on: February 12, 2018, 04:50:14 PM »
Thanks, i'll check it out.  I ordered a M-Carbo trigger spring, so i'll try it first and may not need to go with the complete trigger upgrade. But if I do...

Offline 357MAGNOLE

  • Sr. Member
  • ****
  • Posts: 614
Re: trigger for CZ 455 Tacticool
« Reply #3 on: February 12, 2018, 07:13:47 PM »
Look at the yodave kit. It comes with a few springs and shims. Simple to install, I just ordered my first and have yet to install but if you have any basic skills at disassembling a firearm you can do it in about 10 minutes. I've seen many many glaring reports on this kit reducing creep to 0 and trigger pull weights from less than a Lb to 2.5lbs depending on what you want. I paid $27 shipped.
USN 2006-Present
CZ 455 Varmit Evolution .22 LR
CZ Scorpion EVO 3
Dan Wesson ECO .45

Offline RandyD

  • Newbie
  • *
  • Posts: 3
Re: trigger for CZ 455 Tacticool
« Reply #4 on: February 12, 2018, 10:12:50 PM »
I used this DIP trigger parts with their spring assortment. I have mine at 1lb 3 oz. One of the best triggers I have pulled,nicer than my Anschutz 64 and my cooper 57.    https://www.diproductsinc.com/CZ%20455%20Adjustable%20Sear_it-906907.aspx?CAT=3600                                       

Offline jeterm

  • Jr. Member
  • **
  • Posts: 97
  • RAMI Owner
Re: trigger for CZ 455 Tacticool
« Reply #5 on: February 13, 2018, 11:34:49 AM »
Thanks Painter, I went ahead and ordered the Rifle Basix trigger today.  After your suggestion I did some research and it looks like they are solid triggers that give a good amount of adjustability. 
I know the Timney, the CZ Mr.Fly, and the newest entry the Langley all require stock mods.

You might look into a Rifle Basix. I don't believe those require any.

https://riflebasix.com/product/ceska-zbrojovka-452-trigger-cz-52/

Offline jeterm

  • Jr. Member
  • **
  • Posts: 97
  • RAMI Owner
Re: trigger for CZ 455 Tacticool
« Reply #6 on: February 18, 2018, 10:30:08 PM »
I installed the Rifle Basix trigger, easy install and I love the adjustability. I've set the trigger to 1 pound, no creep and crisp. Now I need to upgrade my scope. I want to do bench rest shooting, and want better clarity and more magnification then I can get from my Nikon BDC 150. Any suggestions?

Offline 357MAGNOLE

  • Sr. Member
  • ****
  • Posts: 614
Re: trigger for CZ 455 Tacticool
« Reply #7 on: February 21, 2018, 08:51:30 AM »
I have a Vortex Crossfire 2 4x12

It's solid.
USN 2006-Present
CZ 455 Varmit Evolution .22 LR
CZ Scorpion EVO 3
Dan Wesson ECO .45

Offline Catdaddy2

  • Jr. Member
  • **
  • Posts: 78
Re: trigger for CZ 455 Tacticool
« Reply #8 on: February 25, 2018, 03:40:04 PM »
I have a 455 and 452 and use a leupold vxII efr 3x9x40 and a weaver T-36. The weaver is strictly for bench and the leupy for everything.

Offline HBOY

  • Jr. Member
  • **
  • Posts: 29
Re: trigger for CZ 455 Tacticool
« Reply #9 on: February 26, 2018, 11:27:30 AM »
Just purchased a 452. I have a Savage TRR SR that I put a Nikon 4.5 X18 BDC on. I put a Weaver Grand Slam 4-16x44 on the 452. I must say I like the Weaver better than the Nikon.

Offline Dieseldog

  • Newbie
  • *
  • Posts: 10
Re: trigger for CZ 455 Tacticool
« Reply #10 on: March 06, 2018, 01:53:00 PM »
you might be interested in this spring.............


Offline Dieseldog

  • Newbie
  • *
  • Posts: 10
Re: trigger for CZ 455 Tacticool
« Reply #11 on: March 24, 2018, 11:32:59 AM »
Sig Sauer  Whiskey 3 4-12x50

 

anything