Author Topic: CZ P07 - Barrel issue? Please pass your finger...  (Read 394 times)

0 Members and 1 Guest are viewing this topic.

Offline Strongarm

  • Newbie
  • *
  • Posts: 10
CZ P07 - Barrel issue? Please pass your finger...
« on: February 14, 2018, 03:05:24 AM »
Hello

I have a  CZ P07 2nd Gen 9mm Luger. I've shot about 300 shots with it since I get it new. But today I was cleaning the gun and I notice that the barrel, outside, in the top part of the chamber is not completely flat, If I pass my finger, it feels like there's a little bumpy in the middle.

It's barely noticeable, but there is... Just in the middle of the chamber, in the top outside, the part that is expossed from the ejection port

Is this normal in P07/P09 or should I take it to repair. It's a brand new gun. Would you pass your finger over the chamber top of your gun and tell me if a little bump is present?

Thanks in advance for your help...

Best regards

Offline M1A4ME

  • Hero Member
  • *****
  • Posts: 3037
  • I've shot the rest, I now own the best - CZ
Re: CZ P07 - Barrel issue? Please pass your finger...
« Reply #1 on: February 14, 2018, 06:28:04 AM »
I bump/hump in the long flat part that is visible when the slide is all the way forward? 

Or the transition at the front of that long flat spot where it locks up against the slide?
Better to have it and not need it, than to need it and not have it.  So, if you see me walking the dogs with my SIG 556R, its okay.

Offline Strongarm

  • Newbie
  • *
  • Posts: 10
Re: CZ P07 - Barrel issue? Please pass your finger...
« Reply #2 on: February 14, 2018, 10:55:00 AM »
I bump/hump in the long flat part that is visible when the slide is all the way forward? 

Or the transition at the front of that long flat spot where it locks up against the slide?

The long flat part that is visible when the slide is all the way forward... The top flat part of the barrel

Offline Craig M Arnold

  • Hero Member
  • *****
  • Posts: 608
Re: CZ P07 - Barrel issue? Please pass your finger...
« Reply #3 on: February 14, 2018, 11:05:47 AM »
I have it on both my P07s and my P09. No need for concern, it is perfectly normal.

Best regards.
Make America Great Again

Offline Strongarm

  • Newbie
  • *
  • Posts: 10
Re: CZ P07 - Barrel issue? Please pass your finger...
« Reply #4 on: February 14, 2018, 12:06:49 PM »
I have it on both my P07s and my P09. No need for concern, it is perfectly normal.

Best regards.

Really? ... Thank you for your answer. Does it Looks like this?



Is this normal in P07/P09?

Offline Warbird

  • Sr. Member
  • ****
  • Posts: 443
Re: CZ P07 - Barrel issue? Please pass your finger...
« Reply #5 on: February 14, 2018, 12:17:43 PM »
My P-07 in .40 S&W is very similar to yours. What makes it look worse than it is, is the way the slide rubs that part of the barrel/chamber producing a bit of a line. As others have said - all is well - now go out and shoot the darn thing!!!    :-)

Sent from my SM-N910V using Tapatalk

Steve

U.S. Air Force Veteran
CZ P-07 (.40 S&W)
Taurus PT111 Millennium G2
Taurus Spectrum

"God Bless The USA" - we need this now more than ever!

Offline Strongarm

  • Newbie
  • *
  • Posts: 10
Re: CZ P07 - Barrel issue? Please pass your finger...
« Reply #6 on: February 14, 2018, 12:33:40 PM »
My P-07 in .40 S&W is very similar to yours. What makes it look worse than it is, is the way the slide rubs that part of the barrel/chamber producing a bit of a line. As others have said - all is well - now go out and shoot the darn thing!!!    :-)

Sent from my SM-N910V using Tapatalk

Great news ... I know what you say, the slide rubs that part and produce a line there... but my concern was more about the bump ... so is it normal?  (sorry if ask this too much but if it's not the same in all P07/P09 that could be a future crack)

Best Regards
« Last Edit: February 14, 2018, 12:37:21 PM by Strongarm »

Offline SI VIS PACEM PARRABELLUM

  • Hero Member
  • *****
  • Posts: 2072
Re: CZ P07 - Barrel issue? Please pass your finger...
« Reply #7 on: February 14, 2018, 01:56:36 PM »
Nothing at all wrong with that barrel. My P-07 looks identical and has nearly 10K rounds fired now.

Offline Strongarm

  • Newbie
  • *
  • Posts: 10
Re: CZ P07 - Barrel issue? Please pass your finger...
« Reply #8 on: February 14, 2018, 03:23:55 PM »
Oh thank you all guys... let's go shoting!

Offline texasmojo

  • Jr. Member
  • **
  • Posts: 95
Re: CZ P07 - Barrel issue? Please pass your finger...
« Reply #9 on: February 15, 2018, 09:20:55 PM »
My P07 is the same. My hump actually shows wearing on the finish.

Offline Underwhere

  • Full Member
  • ***
  • Posts: 143
Re: CZ P07 - Barrel issue? Please pass your finger...
« Reply #10 on: February 16, 2018, 09:53:30 AM »
Like everyone says, it's normal but I give my opinion on why it exists.
It is relieved so that when the slide cycles the chamber of the barrel will move downwards. Having this relief ensures that it can do so without too much contact/friction against the ejection port of the slide.

I believe in some guns they relieve the slide instead of the barrel (or both)

Offline Strongarm

  • Newbie
  • *
  • Posts: 10
Re: CZ P07 - Barrel issue? Please pass your finger...
« Reply #11 on: February 19, 2018, 11:33:35 PM »
Thank you all  :)

 

anything