« previous next »
Pages: [1]   Go Down

Author Topic: CZ-50 rack effort reduction?  (Read 1792 times)

0 Members and 1 Guest are viewing this topic.

Offline farna

  • Newbie
  • *
  • Posts: 3
CZ-50 rack effort reduction?
« on: February 22, 2018, 05:29:22 PM »
I'm a CZ fan, just found this forum! I have two CZ-83s, a CZ-50, and a CZ-52. Just ordered Harrington firing pins for the 50 and 52, didn't know about them until I found this forum!

I have an issue with the CZ-50 though. I originally bought it for my wife since the .32 ammo and weight of the all steel gun would mean a relatively mild recoil. But she can't rack it! I don't like carrying or having a gun in the house with a round in the chamber. The CZ-50 is relatively safe to carry that way, but I just prefer not to. Would using a lighter recoil spring, assuming one could be found, be a good idea? Maybe a variable recoil spring if one can be found? Wolff doesn't have springs for the CZ-50 listed...  Any ideas, or do I just need to look for something else for her? I just wonder why the thing has such a heavy spring when my Star BM 9mm Parabellum doesn't. She can rack that!
Logged

Offline Grendel

  • Administrator
  • Hero Member
  • *****
  • Posts: 8910
  • 'Live Long, and Prosper'
Re: CZ-50 rack effort reduction?
« Reply #1 on: February 22, 2018, 05:48:55 PM »
Thumb cock it before racking the slide, or leave it cocked but chamber empty. That way your wife is not trying to overcome the hammer spring AND the recoil spring.
Logged
Corruptissima re publica plurimae leges - Tacitus

Inter arma enim silent leges - Cicero

I wasn't born in America, but I got here as fast as I could.

Offline Rickytick

  • Hero Member
  • *****
  • Posts: 1253
Re: CZ-50 rack effort reduction?
« Reply #2 on: February 22, 2018, 06:46:23 PM »
Welcome aboard from Oklahoma
Logged

Offline farna

  • Newbie
  • *
  • Posts: 3
Re: CZ-50 rack effort reduction?
« Reply #3 on: February 22, 2018, 07:27:05 PM »
Will try cocking first... didn't think about that! I am a bit concerned that a lighter recoil spring may cause issues.
Logged

Offline Earl Keese

  • Hero Member
  • *****
  • Posts: 5169
Re: CZ-50 rack effort reduction?
« Reply #4 on: February 22, 2018, 08:24:27 PM »
Last time I looked, I couldn't find any replacement recoil springs. Maybe one for a Walther would work.(?)
Logged

Online rdcinhou

  • Hero Member
  • *****
  • Posts: 1786
  • Coat of Arms for Uherský Brod
Re: CZ-50 rack effort reduction?
« Reply #5 on: March 03, 2018, 06:52:27 AM »
Try polishing the hammer spring stalk.  That reduced the trigger pull and racking force required for mine.
Logged
CZ24/27/38/40P/45/52, Vzor 50/70,75BΩ,75D Compact,P01/07/09,P10M/S/C/F(9mm,.45), Phantom,SP01 Tactical,Shadow 2 (Blue,Urban Gray), 82/83/85 PreB, 97BE,97BD,97BDE,100,1911A1, 2075D RAMI,452 American,550 Urban Counter Sniper,805 Bren S1,Drake G2,Duo,Z,vz24 8mm Mauser,FK 7.5 BRNO Field Pistol, PSD

Offline Earl Keese

  • Hero Member
  • *****
  • Posts: 5169
Re: CZ-50 rack effort reduction?
« Reply #6 on: March 03, 2018, 07:08:13 AM »
Quote from: rdcinhou on March 03, 2018, 06:52:27 AM
Try polishing the hammer spring stalk.  That reduced the trigger pull and racking force required for mine.
Mine looked like it was cut out using a jigsaw missing every other tooth.  8)
Logged

Online rdcinhou

  • Hero Member
  • *****
  • Posts: 1786
  • Coat of Arms for Uherský Brod
Re: CZ-50 rack effort reduction?
« Reply #7 on: March 04, 2018, 07:16:35 AM »
Quote from: Earl Keese on March 03, 2018, 07:08:13 AM
Quote from: rdcinhou on March 03, 2018, 06:52:27 AM
Try polishing the hammer spring stalk.  That reduced the trigger pull and racking force required for mine.
Mine looked like it was cut out using a jigsaw missing every other tooth.  8)

Okay, I admit the word "polish" implied that the hammer stalk required minor work. Mine was pretty rough to begin with which causes the hammer spring to "hang" a bit which increases the DA trigger pull.

Of note, while researching the CZ50/70, I found where someone said that the "catalog" DA trigger pull was 23 lbs, but that many people thought it was much closer to 100 lbs.  ;)

Just cleaning up that stalk (and a little oil) made a world of difference in the DA pull and performance of my CZ70.
Logged
CZ24/27/38/40P/45/52, Vzor 50/70,75BΩ,75D Compact,P01/07/09,P10M/S/C/F(9mm,.45), Phantom,SP01 Tactical,Shadow 2 (Blue,Urban Gray), 82/83/85 PreB, 97BE,97BD,97BDE,100,1911A1, 2075D RAMI,452 American,550 Urban Counter Sniper,805 Bren S1,Drake G2,Duo,Z,vz24 8mm Mauser,FK 7.5 BRNO Field Pistol, PSD

Offline eastman

  • Hero Member
  • *****
  • Posts: 3798
Re: CZ-50 rack effort reduction?
« Reply #8 on: March 04, 2018, 06:22:08 PM »
Just checked my vz50 & vz70. The DA is slightly lighter than my Polish P-64 pistols with stock mainspring, but the SA on the CZs isn't as nice as the P-64s.
Logged
I don't look like my avatar!

Offline farna

  • Newbie
  • *
  • Posts: 3
Re: CZ-50 rack effort reduction?
« Reply #9 on: March 05, 2018, 06:34:05 AM »
The rather stiff DA action is, I think, meant to be a "safety" of sorts. Makes it a bit safer to carry with a round in the chamber, less chance of an accidental trigger pull. So the first shot might be a bit tough, but every shot after trigger is easier to pull so it's easier to get a shot on target. Of course if you have plenty time to think about using it you can thumb the hammer back and take more time aiming.

I'll take it apart and polish the hammer spring stalk. I suppose cleaning up the return spring rod wouldn't hurt either.
Logged
Pages: [1]   Go Up
« previous next »