Author Topic: Shadow orange  (Read 212 times)

0 Members and 1 Guest are viewing this topic.

Offline Diver

  • Newbie
  • *
  • Posts: 2
Shadow orange
« on: March 05, 2018, 12:41:17 AM »
Happy owner of a shadow orange. Not as happy about the springs that come with. There are three main, three recoil, and two firing pin springs including the ones in the gun already. . All three of each type are different lengths. Suppose to be a 11lb and 13lb recoil but can't tell which is which. Also the firing pin spring had the shorter of the two installed so I thought it would be the reduced power spring, I put the other one in but without a doubt the longer spring provided less resistance. I inspected it closer and it is noticeably made with smaller diameter steel. As a side note the combo of weaker firing pin spring, a cajun 11.5 hammer spring, and no extended firing pin resulted in 100% ignition of  cci primers. It would have been great if they were packaged such they could be told apart, or color coded. Anyone got any solid info on the springs so I an tell the weights? Thanks for the help..

Offline speedseeker

  • Jr. Member
  • **
  • Posts: 70
Re: Shadow orange
« Reply #1 on: March 05, 2018, 09:56:28 AM »
Nope. I abandoned immediately and added some spice.

Sent from my iPhone using Tapatalk