Author Topic: Trigger pin slips in new 75 Compact  (Read 250 times)

0 Members and 1 Guest are viewing this topic.

Offline Commo

  • Jr. Member
  • **
  • Posts: 29
Trigger pin slips in new 75 Compact
« on: March 09, 2018, 12:12:12 PM »
I’ve got about 500 rounds through my new 75 Compact and find that after a 150-round session that the trigger pin has moved out about 1/8”..

It presses back in but is obviously too loose or not flared properly on one end.

Is this pin from Cajun Gun Works the better solution rather than fuss with the stock pin?

https://cajungunworks.com/product/tr-pin-cgws-exclusive-floating-trigger-pin/

Thanks,

Commo
See my Michigan trout stream restoration & conservation journalism videos at www.AuSableTrout.com

Offline Tok36

  • Hero Member
  • *****
  • Posts: 3717
Re: Trigger pin slips in new 75 Compact
« Reply #1 on: March 09, 2018, 12:51:39 PM »
In my opinion if you ever plan on taking the pistol apart the CGW floating trigger pin is well worth it. It is retained by the Trigger Return Spring located at the center of the pin. This allows it to be pushed out of place with a standard punch and a tap with a hammer.

The factory trigger pin is retained by staking at the ends of the pin. To keep it in place you can restake the end that is allowing it to slip out of place.
« Last Edit: March 09, 2018, 12:54:15 PM by Tok36 »
Will work for CZ pics! (including but not limited to all CZ clones)

Offline Commo

  • Jr. Member
  • **
  • Posts: 29
Re: Trigger pin slips in new 75 Compact
« Reply #2 on: March 11, 2018, 09:38:34 PM »
No brainer to pick up the floating trigger pin...will be ordering...thanks!

Commo
See my Michigan trout stream restoration & conservation journalism videos at www.AuSableTrout.com

 

anything