Author Topic: TacSol Custom CZ 512's  (Read 448 times)

0 Members and 1 Guest are viewing this topic.

Offline spencerhut

  • Jr. Member
  • **
  • Posts: 52
    • Sheepdog Supplies
TacSol Custom CZ 512's
« on: March 09, 2018, 10:54:15 PM »
Our good friends at Tactical Solutions lightened up a couple of CZ 512's for us to use in NSSF matches. Can't wait to get them out and pound some rounds through them.
Sheepdog Supplies
470873 Hwy 95
Sagle ID, 83860
Ph. 208-263-4195
Tue-Fri 10-6 /  Sat 10-5 / Closed Sun-Mon
Website www.sheepdogsupplies.com

Offline spencerhut

  • Jr. Member
  • **
  • Posts: 52
    • Sheepdog Supplies
Re: TacSol Custom CZ 512's
« Reply #1 on: March 12, 2018, 09:03:14 PM »
Did some work on the trigger of my wife's gun. Started at 4.25lbs and got it down to 2.5lbs. No creep, zero over travel. Runs 100%
Cut the trigger shoe off and re-welded it as far back as possible (she has really small hands)
Trimmed the sear engagement surface on the hammer just a bit.
Drilled hole for trigger spring just shy of stock engagement surface.
Polished all the usual hammer and trigger surfaces.
Trigger is ~1/4" shorter reach now. Actually feels so nice I may cut mine too :-)
Stock trigger on top.
CZ512 Trigger by spencerhut, on Flickr
Sheepdog Supplies
470873 Hwy 95
Sagle ID, 83860
Ph. 208-263-4195
Tue-Fri 10-6 /  Sat 10-5 / Closed Sun-Mon
Website www.sheepdogsupplies.com

Offline spencerhut

  • Jr. Member
  • **
  • Posts: 52
    • Sheepdog Supplies
Re: TacSol Custom CZ 512's
« Reply #2 on: March 12, 2018, 09:04:42 PM »
No optic mounts yet but I went ahead and function tested both guns with ~300 rounds each. (1) fail to feed and one fail to fire out of 650 rounds total out of both guns. Used a dozen 10-Round mags. Chronographed both guns and even with barrels 4" shorter than stock. the TacSol barrels were only ~10FPS slower. That is amazing! A good start!
SAM_5134 by spencerhut, on Flickr
Sheepdog Supplies
470873 Hwy 95
Sagle ID, 83860
Ph. 208-263-4195
Tue-Fri 10-6 /  Sat 10-5 / Closed Sun-Mon
Website www.sheepdogsupplies.com

Offline KnightSchneider

  • Jr. Member
  • **
  • Posts: 67
Re: TacSol Custom CZ 512's
« Reply #3 on: March 13, 2018, 06:58:55 AM »
those look good!
are you going to be selling any?


Offline spencerhut

  • Jr. Member
  • **
  • Posts: 52
    • Sheepdog Supplies
Re: TacSol Custom CZ 512's
« Reply #4 on: March 13, 2018, 11:02:09 AM »
those look good!
are you going to be selling any?

There would have to be a lot of interest to make this worth regular production.
Sheepdog Supplies
470873 Hwy 95
Sagle ID, 83860
Ph. 208-263-4195
Tue-Fri 10-6 /  Sat 10-5 / Closed Sun-Mon
Website www.sheepdogsupplies.com

Offline Baker_cs

  • Newbie
  • *
  • Posts: 7
Re: TacSol Custom CZ 512's
« Reply #5 on: March 14, 2018, 01:57:00 PM »
You may add my name to the list of interested people
You Are . . . What You Do . . . When It Counts

CZ's - Various

Offline spencerhut

  • Jr. Member
  • **
  • Posts: 52
    • Sheepdog Supplies
Re: TacSol Custom CZ 512's
« Reply #6 on: March 15, 2018, 11:20:13 AM »
You may add my name to the list of interested people
Well that is one, we only need about 999 more to get any hope of doing this . . .  ;D
Sheepdog Supplies
470873 Hwy 95
Sagle ID, 83860
Ph. 208-263-4195
Tue-Fri 10-6 /  Sat 10-5 / Closed Sun-Mon
Website www.sheepdogsupplies.com

Offline Psyop96

  • Hero Member
  • *****
  • Posts: 1868
Re: TacSol Custom CZ 512's
« Reply #7 on: March 15, 2018, 11:57:00 AM »
Nice work! 999...are there even that many 512s in the US market? . Really like the CZ 512 Tactical version; don’t think the 512 models get the attention they deserve.

Offline spencerhut

  • Jr. Member
  • **
  • Posts: 52
    • Sheepdog Supplies
Re: TacSol Custom CZ 512's
« Reply #8 on: March 15, 2018, 02:30:53 PM »
Oh there are WAY more than 1k out there. Not sure of the exact number.
Sheepdog Supplies
470873 Hwy 95
Sagle ID, 83860
Ph. 208-263-4195
Tue-Fri 10-6 /  Sat 10-5 / Closed Sun-Mon
Website www.sheepdogsupplies.com

 

anything