Author Topic: Pawn shop find  (Read 1826 times)

0 Members and 1 Guest are viewing this topic.

Offline RaksCity

  • Jr. Member
  • **
  • Posts: 30
Re: Pawn shop find
« Reply #15 on: April 06, 2018, 02:18:21 AM »
Nice find. Pawn shops around here would have been close to retail on that.
Yeah I see used ones near retail. I was lucky to have saw this one. Funny thing is, I left in my car then gave it a second thought and immediately turned back around. I convinced myself I didn't need another gun the first time I looked at it. Then I snapped back into reality.

Offline doc171

  • Full Member
  • ***
  • Posts: 283
  • FIELD MEDICAL TECHNICIAN
Re: Pawn shop find
« Reply #16 on: April 07, 2018, 01:50:43 AM »
What is the date code ?

Offline GeneticallySwiss

  • Full Member
  • ***
  • Posts: 360
Re: Pawn shop find
« Reply #17 on: April 07, 2018, 02:26:27 AM »
Now it’s time to buy a lottery ticket, while you’re on a roll.  8)


GS
"Rules are for the obedience of fools and guidance of wise men"

 - Douglas Bader -

Offline Jiva

  • Full Member
  • ***
  • Posts: 141
  • I came for the pistols and stayed for the rifles
Re: Pawn shop find
« Reply #18 on: April 07, 2018, 09:57:30 AM »
Nothing like being in the right place at the right time.

You sir must be livin' right to come across a find like that.

Congrats and enjoy :D
75 D PCR Compact
75 SP-01 Tactical 9mm
612 HD
452 2E ZKM Lux .22

Offline wts70mc

  • Newbie
  • *
  • Posts: 18
Re: Pawn shop find
« Reply #19 on: April 07, 2018, 10:44:50 AM »
I’m going by a pawn shop today!!!


Sent from my iPhone using Tapatalk

Offline Atomic Punk

  • Jr. Member
  • **
  • Posts: 47
Re: Pawn shop find
« Reply #20 on: April 07, 2018, 11:49:54 AM »
Score.

These kind of posts make me stop into pawn shops occasionally but, so far, I am 0-fer.

Offline RaksCity

  • Jr. Member
  • **
  • Posts: 30
Re: Pawn shop find
« Reply #21 on: April 07, 2018, 11:17:32 PM »
What is the date code ?
It says 05 on it

Offline doc171

  • Full Member
  • ***
  • Posts: 283
  • FIELD MEDICAL TECHNICIAN
Re: Pawn shop find
« Reply #22 on: April 08, 2018, 12:41:37 AM »
What is the date code ?
It says 05 on it
Thanks for the date code, I was just wondering when it was manufactured.

Offline RaksCity

  • Jr. Member
  • **
  • Posts: 30
Re: Pawn shop find
« Reply #23 on: April 08, 2018, 10:54:20 PM »
Did some polishing work today. Took me about 3 hours trying to put the sear cage back together correctly. I don't think I would want to do it again. Also ordered up some CGW springs.

Offline cntrydawwwg

  • Hero Member
  • *****
  • Posts: 4740
Re: Pawn shop find
« Reply #24 on: April 08, 2018, 11:36:27 PM »
You did the hard part. Once you put the sear cage together a couple more times it’s not really that bad.
If guns are outlawed.........
 Only outlaws will have guns.

Offline RaksCity

  • Jr. Member
  • **
  • Posts: 30
Re: Pawn shop find
« Reply #25 on: April 09, 2018, 01:06:09 AM »
You did the hard part. Once you put the sear cage together a couple more times it’s not really that bad.
I might have to. There is no spring tension on the decocker. My guess is one of the springs isn't seated right.

Offline LeMarque

  • Jr. Member
  • **
  • Posts: 81
Re: Pawn shop find
« Reply #26 on: April 09, 2018, 10:29:58 PM »
You did the hard part. Once you put the sear cage together a couple more times it’s not really that bad.
I might have to. There is no spring tension on the decocker. My guess is one of the springs isn't seated right.

https://photos.google.com/share/AF1QipMcXTtNtO9FOlyv4yFLCv5f_0gad_DE8WVK41DvyfWAGNW6TNXQnA-4t5bj-eI1Hw?key=Wm5kNVN6QnhXZ3E0ZWJ2N3JFM21EOU4zWF9Fc093

Offline Craig M Arnold

  • Full Member
  • ***
  • Posts: 343
Re: Pawn shop find
« Reply #27 on: April 10, 2018, 12:42:40 AM »
You did the hard part. Once you put the sear cage together a couple more times it’s not really that bad.
I might have to. There is no spring tension on the decocker. My guess is one of the springs isn't seated right.

Most likely the decocker spring leg is not hooked to the leg of the decocker lever. It's probably just setting on the sear. Check that before you take the sear cage apart again.

Unless I have to install a new FPB lifter or something, I use a slave pin and keep the sear cage intact. I never enjoy putting a CZ decocker sear cage back together.  >:(
Make America Great Again

Offline RaksCity

  • Jr. Member
  • **
  • Posts: 30
Re: Pawn shop find
« Reply #28 on: April 10, 2018, 01:37:28 AM »
You did the hard part. Once you put the sear cage together a couple more times it’s not really that bad.
I might have to. There is no spring tension on the decocker. My guess is one of the springs isn't seated right.

https://photos.google.com/share/AF1QipMcXTtNtO9FOlyv4yFLCv5f_0gad_DE8WVK41DvyfWAGNW6TNXQnA-4t5bj-eI1Hw?key=Wm5kNVN6QnhXZ3E0ZWJ2N3JFM21EOU4zWF9Fc093
#53 is what I think I didn't do. Thanks for that info!

Offline RaksCity

  • Jr. Member
  • **
  • Posts: 30
Re: Pawn shop find
« Reply #29 on: April 10, 2018, 01:39:02 AM »
You did the hard part. Once you put the sear cage together a couple more times it’s not really that bad.
I might have to. There is no spring tension on the decocker. My guess is one of the springs isn't seated right.

Most likely the decocker spring leg is not hooked to the leg of the decocker lever. It's probably just setting on the sear. Check that before you take the sear cage apart again.

Unless I have to install a new FPB lifter or something, I use a slave pin and keep the sear cage intact. I never enjoy putting a CZ decocker sear cage back together.  >:(
I will check that and post up what I find out. Thanks!