The 2023 CZUB Catalog is online!
0 Members and 1 Guest are viewing this topic.
Nice find. Pawn shops around here would have been close to retail on that.
What is the date code ?
Quote from: doc171 on April 07, 2018, 01:50:43 AMWhat is the date code ?It says 05 on it
You did the hard part. Once you put the sear cage together a couple more times it?s not really that bad.
Quote from: cntrydawwwg on April 08, 2018, 11:36:27 PMYou did the hard part. Once you put the sear cage together a couple more times it?s not really that bad. I might have to. There is no spring tension on the decocker. My guess is one of the springs isn't seated right.
Quote from: RaksCity on April 09, 2018, 01:06:09 AMQuote from: cntrydawwwg on April 08, 2018, 11:36:27 PMYou did the hard part. Once you put the sear cage together a couple more times it?s not really that bad. I might have to. There is no spring tension on the decocker. My guess is one of the springs isn't seated right.https://photos.google.com/share/AF1QipMcXTtNtO9FOlyv4yFLCv5f_0gad_DE8WVK41DvyfWAGNW6TNXQnA-4t5bj-eI1Hw?key=Wm5kNVN6QnhXZ3E0ZWJ2N3JFM21EOU4zWF9Fc093
Quote from: RaksCity on April 09, 2018, 01:06:09 AMQuote from: cntrydawwwg on April 08, 2018, 11:36:27 PMYou did the hard part. Once you put the sear cage together a couple more times it?s not really that bad. I might have to. There is no spring tension on the decocker. My guess is one of the springs isn't seated right.Most likely the decocker spring leg is not hooked to the leg of the decocker lever. It's probably just setting on the sear. Check that before you take the sear cage apart again.Unless I have to install a new FPB lifter or something, I use a slave pin and keep the sear cage intact. I never enjoy putting a CZ decocker sear cage back together.