I ordered up some goodies from our friends down south. For my shadow 2 I ordered the disconnector, reduced trigger spring, extended firing pin and hammer springs kit, and tuners kit.
Started with the disconnector which they recommend suing a dremel and I did because it is hard. I installed and sanded about 10-12 times before I got it right. Installed new hammer spring at this time
I enjoy working on my own stuff as I better understand what is going on and can fix a problem on the spot quicker (if parts applicable).
Next decided to do something easy so did the firing pin.
Next the trigger spring. While I had that apart I went ahead and polished the outside edge of the trigger bar. Put frame back together.
Installed the red recoil spring and assembled.
Cycled and tested again for all functions. Perfect. Will run it with my load ammo tomorrow.